Rankinė rotorinė pompa naftos produktams (78000) (Kodas: 78000)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Mark
Vorel
Symbol
78000
Series
GRD
Length
150 cm
Max. performance
19 l/min
Max lifting height
5 m
Max. lifting depth
1.5 m Pump for pumping oil from a barrel. It has a toothed, rotary pressing mechanism. Technical data: Maximum capacity: 19 l/min Maximum lifting height: 5 m Maximum lifting depth: 1.5 m The pump is used to pump liquids such as oils or liquid greases from barrels to smaller containers. To use the pump, it must be mounted in the barrel opening so that the crank can be rotated freely. To do this, screw a mounting ring into the thread of the barrel's filler hole, then insert the pump pipe through it and lock it with a screw placed in the ring. Place a container under the pump outlet and start pumping by turning the crank. After finishing work, pull the pump out of the barrel and make a few more turns to empty the pump of any remaining oil.
Vorel
Symbol
78000
Series
GRD
Length
150 cm
Max. performance
19 l/min
Max lifting height
5 m
Max. lifting depth
1.5 m Pump for pumping oil from a barrel. It has a toothed, rotary pressing mechanism. Technical data: Maximum capacity: 19 l/min Maximum lifting height: 5 m Maximum lifting depth: 1.5 m The pump is used to pump liquids such as oils or liquid greases from barrels to smaller containers. To use the pump, it must be mounted in the barrel opening so that the crank can be rotated freely. To do this, screw a mounting ring into the thread of the barrel's filler hole, then insert the pump pipe through it and lock it with a screw placed in the ring. Place a container under the pump outlet and start pumping by turning the crank. After finishing work, pull the pump out of the barrel and make a few more turns to empty the pump of any remaining oil.