Deimantinis pjovimo diskas keramikai | pjovimui be pažeidimų | 125 mm (YT-59972) (Kodas: YT-59972)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
Mark
Yato
Symbol
YT-59972
Diameter
125mm
Mounting diameter
22.2mm
Height of the cutting segment
10mm
Thickness of the cutting segment
1.6mm
Chemical composition of the cutting segment
Fe 20%, Cu 55%, Sn 7%, Ni 8%, Co 10%, diamond coating 15%
Material
Steel 65Mn
Max. RPM
12000 min⁻¹
Max. linear speed of the disc
80 m/s
Application
ceramic tiles, glazed tiles, stone tiles, glass, porcelain, ceramics, stoneware, roof tiles
Type of work
dry, wet Designed for precise and clean dry cutting. the high 10 mm segment increases the durability of the disc
reduced cross-section allows you to cut faster and more precisely, without chipping the cut edges and with less load on the grinder
segment with optimally selected cobalt hardness and selected class A industrial diamond granulate
precise grinding of tile edges at an angle of 45° (even when working manually)
The centered blade flange ensures no side runout and cuts without edge damage
chamfering stoneware tiles
cutting the valley edges of roof tiles at an angle
Yato
Symbol
YT-59972
Diameter
125mm
Mounting diameter
22.2mm
Height of the cutting segment
10mm
Thickness of the cutting segment
1.6mm
Chemical composition of the cutting segment
Fe 20%, Cu 55%, Sn 7%, Ni 8%, Co 10%, diamond coating 15%
Material
Steel 65Mn
Max. RPM
12000 min⁻¹
Max. linear speed of the disc
80 m/s
Application
ceramic tiles, glazed tiles, stone tiles, glass, porcelain, ceramics, stoneware, roof tiles
Type of work
dry, wet Designed for precise and clean dry cutting. the high 10 mm segment increases the durability of the disc
reduced cross-section allows you to cut faster and more precisely, without chipping the cut edges and with less load on the grinder
segment with optimally selected cobalt hardness and selected class A industrial diamond granulate
precise grinding of tile edges at an angle of 45° (even when working manually)
The centered blade flange ensures no side runout and cuts without edge damage
chamfering stoneware tiles
cutting the valley edges of roof tiles at an angle