Deimantinis pjovimo diskas keramikai | pjovimui be pažeidimų | 125 mm (YT-59982) (Kodas: YT-59982)
Išparduota
Padidinti vaizdą 
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
TURBO DIAMOND DISC 125MM FOR QUICK CUTTING OF POTTERY WITHOUT SPRAYING
Mark
Yato
Symbol
YT-59982
Diameter
125mm
Mounting diameter
22.2mm
Height of the cutting segment
10mm
Thickness of the cutting segment
1.3mm
Chemical composition of the cutting segment
Fe 20%, Cu 55%, Sn 7%, Ni 8%, Co 10%, diamond coating 15%
Material
Steel 65Mn
Max. RPM
12000 min⁻¹
Max. linear speed of the disc
80 m/s
Application
reinforced concrete, granite, clinker, silicate
Type of work
dry, wet The disc is designed for precise and clean wet cutting. the high 10 mm segment increases the durability of the disc
reduced cross-section allows you to cut faster and more precisely, without chipping the cut edges and with less load on the grinder
segment with optimally selected cobalt hardness and selected class A industrial diamond granulate
very fast, high-quality cutting
easy straight cutting "by hand" with an angle grinder
Mark
Yato
Symbol
YT-59982
Diameter
125mm
Mounting diameter
22.2mm
Height of the cutting segment
10mm
Thickness of the cutting segment
1.3mm
Chemical composition of the cutting segment
Fe 20%, Cu 55%, Sn 7%, Ni 8%, Co 10%, diamond coating 15%
Material
Steel 65Mn
Max. RPM
12000 min⁻¹
Max. linear speed of the disc
80 m/s
Application
reinforced concrete, granite, clinker, silicate
Type of work
dry, wet The disc is designed for precise and clean wet cutting. the high 10 mm segment increases the durability of the disc
reduced cross-section allows you to cut faster and more precisely, without chipping the cut edges and with less load on the grinder
segment with optimally selected cobalt hardness and selected class A industrial diamond granulate
very fast, high-quality cutting
easy straight cutting "by hand" with an angle grinder