Rinkinys darbui aukštyje | apsaugos nuo kritimo (YT-74218) (Kodas: YT-74218)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
SAFETY HARNESS BELT HIGH COMFORT LIGHT
Product description
The YT-74218 safety harness with the waist belt can be used both as an element of the fall protection system and for work in suspension. The harness is one of the lightest in its class, incl. thanks to the attachment points made of aluminum. Mesh material in the shoulder, hip and thigh straps as well as EVA fillings improve comfort, air circulation and close fit to the body. Properly fitted harness must fit tightly to the torso, belt and thighs so that, together with a dedicated attachment point, it can evenly distribute the forces acting on the body during a fall or to work comfortably in the suspension. Universal size
two attachment points for fall arrest system compliant with EN361
one attachment point for the suspension work system compliant with EN813
two lateral attachment points for work in support according to EN358
four tool loops in the waist belt for hand tools with a maximum weight of 2 kg per loop
adjustable chest, hip and thigh straps
polyester textile tapes with a width of 45 mm and strength higher than 27 KN
The YT-74218 safety harness with the waist belt has been tested in an EU-accredited laboratory and meets the requirements of EN 361: 2002, EN 358: 2018 and EN 813: 2008.
Shoulder straps
Waist belt
Thigh belts
Front attachment point complies with EN361
Rear hitch point complies with EN361
Lateral attachment points according to EN358
Front attachment point complies with EN813
Buckles for adjusting the size
Loops for excess tape
Tool loops
SECURITY AND LEGAL ASPECTS Work at height is work performed at a level greater than 1 meter above the ground / floor, the surface of which is not surrounded on all sides by solid walls or a protective structure up to a height of 1.5 meters. If, in such conditions, it is not possible to apply collective protection measures, the employer, when commissioning work, should, inter alia, provide personal protective equipment. Each piece of fall protection equipment should meet certain safety standards, which the manufacturer only confirms through an EU-accredited testing laboratory. Confirmation of compliance with the standards primarily guarantees the user's safety, but also protects both the employee and the employer against financial consequences resulting from penalties imposed by the labor inspection institution. All elements of the YATO fall protection equipment have up-to-date tests confirming compliance with safety standards, and their use in accordance with the instructions guarantees 5 years of reliable operation. THE TERM OF VALIDITY The harness can be used for five years from its first use. Parameters
Material: polyester
Product description
The YT-74218 safety harness with the waist belt can be used both as an element of the fall protection system and for work in suspension. The harness is one of the lightest in its class, incl. thanks to the attachment points made of aluminum. Mesh material in the shoulder, hip and thigh straps as well as EVA fillings improve comfort, air circulation and close fit to the body. Properly fitted harness must fit tightly to the torso, belt and thighs so that, together with a dedicated attachment point, it can evenly distribute the forces acting on the body during a fall or to work comfortably in the suspension. Universal size
two attachment points for fall arrest system compliant with EN361
one attachment point for the suspension work system compliant with EN813
two lateral attachment points for work in support according to EN358
four tool loops in the waist belt for hand tools with a maximum weight of 2 kg per loop
adjustable chest, hip and thigh straps
polyester textile tapes with a width of 45 mm and strength higher than 27 KN
The YT-74218 safety harness with the waist belt has been tested in an EU-accredited laboratory and meets the requirements of EN 361: 2002, EN 358: 2018 and EN 813: 2008.
Shoulder straps
Waist belt
Thigh belts
Front attachment point complies with EN361
Rear hitch point complies with EN361
Lateral attachment points according to EN358
Front attachment point complies with EN813
Buckles for adjusting the size
Loops for excess tape
Tool loops
SECURITY AND LEGAL ASPECTS Work at height is work performed at a level greater than 1 meter above the ground / floor, the surface of which is not surrounded on all sides by solid walls or a protective structure up to a height of 1.5 meters. If, in such conditions, it is not possible to apply collective protection measures, the employer, when commissioning work, should, inter alia, provide personal protective equipment. Each piece of fall protection equipment should meet certain safety standards, which the manufacturer only confirms through an EU-accredited testing laboratory. Confirmation of compliance with the standards primarily guarantees the user's safety, but also protects both the employee and the employer against financial consequences resulting from penalties imposed by the labor inspection institution. All elements of the YATO fall protection equipment have up-to-date tests confirming compliance with safety standards, and their use in accordance with the instructions guarantees 5 years of reliable operation. THE TERM OF VALIDITY The harness can be used for five years from its first use. Parameters
Material: polyester