Grąžtų galandymo staklės | 2 galvos | 3-16 mm (ES-0016) (Kodas: ES-0016)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Šlifavimo plokštė skersmuo: 58; 70 mm
Gręžimo skersmuo:
- 3 - 10 mm (58 mm plokštė)
- 8 - 16 mm (70 mm plokštė)
APEX kampas 118 laipsnių
Galia [W] 70
Greitis [1 / min] 1600
Skersmuo [mm] 3-16 Diameter of sanding plate: 58 mm; 70 mm
Drill diameter:
- 3 mm - 10 mm (plate 58 mm)
- 8 mm - 16 mm (plate 70 mm)
The apex angle of the drill: 118 degrees Product description
The sharpener is designed for sharpening all-steel drills (high speed HSS, cobalt, carbide) drill bits for metal. The sharpener enables sharpening of the drill bits from 3mm to 16mm The adapter supports drill bits of the following diameters:
3mm / 3.5mm / 4mm / 4,2mm / 4,5mm / 5mm / 5,5mm / 6mm / 6,5mm / 7mm / 7,5mm / 7,5mm / 8mm / 8.5mm / 8.5mm / 9mm / 9.5mm / 10mm Additional adapter supports drill bits of diameters:
8mm / 8.8mm / 9.5mm / 10.3 / 11.1mm / 12mm / 12.7mm / 13.5mm / 14.3mm / 15.1mm / 16mm Such a wide range of sizes allows for the sharpening of the most frequently used drill bits. With a simple operation, the blade allows sharpening of the drill in just a few seconds, while ensuring high repeatability. The cutting edge thus obtained maximizes the performance of the drill. TECHNICAL DATA: Power: 250 W
Power supply: 230 V ~ 50 Hz
Rotational speed: 1600 rpm
Operating diameters: 3 - 16 mm
Gręžimo skersmuo:
- 3 - 10 mm (58 mm plokštė)
- 8 - 16 mm (70 mm plokštė)
APEX kampas 118 laipsnių
Galia [W] 70
Greitis [1 / min] 1600
Skersmuo [mm] 3-16 Diameter of sanding plate: 58 mm; 70 mm
Drill diameter:
- 3 mm - 10 mm (plate 58 mm)
- 8 mm - 16 mm (plate 70 mm)
The apex angle of the drill: 118 degrees Product description
The sharpener is designed for sharpening all-steel drills (high speed HSS, cobalt, carbide) drill bits for metal. The sharpener enables sharpening of the drill bits from 3mm to 16mm The adapter supports drill bits of the following diameters:
3mm / 3.5mm / 4mm / 4,2mm / 4,5mm / 5mm / 5,5mm / 6mm / 6,5mm / 7mm / 7,5mm / 7,5mm / 8mm / 8.5mm / 8.5mm / 9mm / 9.5mm / 10mm Additional adapter supports drill bits of diameters:
8mm / 8.8mm / 9.5mm / 10.3 / 11.1mm / 12mm / 12.7mm / 13.5mm / 14.3mm / 15.1mm / 16mm Such a wide range of sizes allows for the sharpening of the most frequently used drill bits. With a simple operation, the blade allows sharpening of the drill in just a few seconds, while ensuring high repeatability. The cutting edge thus obtained maximizes the performance of the drill. TECHNICAL DATA: Power: 250 W
Power supply: 230 V ~ 50 Hz
Rotational speed: 1600 rpm
Operating diameters: 3 - 16 mm