Paviršiaus hermetikas | Vidutinis stiprumas | 50 g pompa dozatorius (80608) (Kodas: 80608)
Išparduota
Padidinti vaizdą 
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: BGS-technic
Description
for sealing gear and engine housings, flange connections, bearing caps and differential housing covers
good for automotive and motorcycle industry, chemical and petrochemical industry, gas, water and electricity companies, drilling rigs and many more
solvent-free design element for all seal sizes
ideal for complicated shaped parts
can be used on vertical surfaces thanks to thixotropic properties
seals the parts against low pressures (about 5 bar) already after joining
the max. pressure sealing capability of up to 350 bar is achieved with elimination of oxygen following complete hardening (depending on sealing surface size)
colour: green
viscosity range at 20 °C: 17,000 - 50,000 mPa.s
max. filling capacity: 0.30 mm
hand-tight: 20 - 40 min
functional hardness: 1 - 3 h
temperature resistance: -55 - 150 °C
density at 25 °C: 1.10 g/cm³
load: 2 - 4 Nm
flashpoint: >100 °C
shear strength: 4 - 6 N/mm² (DIN 54452)
strength class: 1 (DIN 30661)
Technical data
Gross weight 90 g
for sealing gear and engine housings, flange connections, bearing caps and differential housing covers
good for automotive and motorcycle industry, chemical and petrochemical industry, gas, water and electricity companies, drilling rigs and many more
solvent-free design element for all seal sizes
ideal for complicated shaped parts
can be used on vertical surfaces thanks to thixotropic properties
seals the parts against low pressures (about 5 bar) already after joining
the max. pressure sealing capability of up to 350 bar is achieved with elimination of oxygen following complete hardening (depending on sealing surface size)
colour: green
viscosity range at 20 °C: 17,000 - 50,000 mPa.s
max. filling capacity: 0.30 mm
hand-tight: 20 - 40 min
functional hardness: 1 - 3 h
temperature resistance: -55 - 150 °C
density at 25 °C: 1.10 g/cm³
load: 2 - 4 Nm
flashpoint: >100 °C
shear strength: 4 - 6 N/mm² (DIN 54452)
strength class: 1 (DIN 30661)
Technical data
Gross weight 90 g