Indukcinis šildytuvas | 1,5 kW (2169) (Kodas: 2169)
Išparduota
Padidinti vaizdą 
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: BGS-technic
Description
principle of operation: there is an alternating magnetic field, the metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up
allows heating of screws/nuts without heating surrounding components too much or even destroying them, as it is often the case when heated with a torch
within the shortest possible time, e.g. rusty nuts are heated and can be loosened
using on e. g. ball joint pinch bolts and other items on axle and engine
a formless coil (length: 800 mm) allows using the device also for heating of components (bearings, etc.) e.g. bearings in which the heating facilitates disassembly or assembly
includes the following induction coils
induction coil: 19 mm, length: 220 mm (for Ø 10-16 mm)
induction coil: 27 mm, length: 220 mm (for Ø 17-24 mm)
induction coil: 50 mm, length: 235 mm (for heating small surfaces)
formless coil, 800 mm, for heating of components
max. power: 1.5 kW
max. current: 7.5 A
Technical data
Length 200 mm
Width 140 mm
Height 75 mm
Max. operating temperature 900 °C
Gross weight 5166 g
Power supply voltage (AC) 230 V
Power supply frequency 50 - 60 Hz
Protection class IP20
principle of operation: there is an alternating magnetic field, the metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up
allows heating of screws/nuts without heating surrounding components too much or even destroying them, as it is often the case when heated with a torch
within the shortest possible time, e.g. rusty nuts are heated and can be loosened
using on e. g. ball joint pinch bolts and other items on axle and engine
a formless coil (length: 800 mm) allows using the device also for heating of components (bearings, etc.) e.g. bearings in which the heating facilitates disassembly or assembly
includes the following induction coils
induction coil: 19 mm, length: 220 mm (for Ø 10-16 mm)
induction coil: 27 mm, length: 220 mm (for Ø 17-24 mm)
induction coil: 50 mm, length: 235 mm (for heating small surfaces)
formless coil, 800 mm, for heating of components
max. power: 1.5 kW
max. current: 7.5 A
Technical data
Length 200 mm
Width 140 mm
Height 75 mm
Max. operating temperature 900 °C
Gross weight 5166 g
Power supply voltage (AC) 230 V
Power supply frequency 50 - 60 Hz
Protection class IP20