Infraraudonųjų spindulių šildytuvas | mobilus | 2000W (68792) (Kodas: 68792)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Lund
68792
INFRARED HEATER 2000W
Brand
Lund
Symbol
68792
Power
2000 W
Power regulation range
650, 1300, 2000 W
Working area
25 m²
Voltage
220-240 V a.c.
Frequency
50/60 Hz
Type of filament
quartz lamp
Infrared waves
medium-long
Lighting modes
3
Dimensions
500x500x2100 mm
Stand height
1800-2100 mm
Colour
black
Digital control panel
no
Time setting (timer)
no
Temperature control
no
Switch
yes
Heating time
20 s
Overheating protection
yes
Heating element life
5000 h
Type of mounting
wall, stand
Cable length
1.8 m
Protection class
IP34
Weight
8 kg
Application
outdoors and indoors The infrared heater is perfect for heating the workplace or rest during cold days and nights. Equipped with a quartz lamp, it heats up to 25 m2 of surface. The IP34 protection class allows the heater to be used in closed rooms, e.g. houses, garages, as well as on terraces and balconies, while avoiding exposure to heavy rainfall. The heater has a 3-stage power regulation and protection against falling and overheating. It can be placed on a stand or mounted on the wall. quartz filament with a service life of 5000 h
heating area: 25 m2
3 power levels: 650 W, 1300 W, 2000 W
infrared waves: medium, long
heating time: 20 seconds
installation location: wall or stand
control: pull cord switch
application: indoors and outdoors
The infrared heater works by radiation, i.e. similarly to the sun. Heat is emitted in the form of infrared radiation, and air is not needed for this. It heats a given place or people immediately and directly. IMPORTANT: Due to the high power of the device, the mains circuit must be equipped with a protective conductor and a fuse of at least 16 A. When using extension cords, a high-quality extension cord with three wires that can withstand a current load of 16 A must be used. If in doubt, contact a qualified electrician.
INFRARED HEATER 2000W
Brand
Lund
Symbol
68792
Power
2000 W
Power regulation range
650, 1300, 2000 W
Working area
25 m²
Voltage
220-240 V a.c.
Frequency
50/60 Hz
Type of filament
quartz lamp
Infrared waves
medium-long
Lighting modes
3
Dimensions
500x500x2100 mm
Stand height
1800-2100 mm
Colour
black
Digital control panel
no
Time setting (timer)
no
Temperature control
no
Switch
yes
Heating time
20 s
Overheating protection
yes
Heating element life
5000 h
Type of mounting
wall, stand
Cable length
1.8 m
Protection class
IP34
Weight
8 kg
Application
outdoors and indoors The infrared heater is perfect for heating the workplace or rest during cold days and nights. Equipped with a quartz lamp, it heats up to 25 m2 of surface. The IP34 protection class allows the heater to be used in closed rooms, e.g. houses, garages, as well as on terraces and balconies, while avoiding exposure to heavy rainfall. The heater has a 3-stage power regulation and protection against falling and overheating. It can be placed on a stand or mounted on the wall. quartz filament with a service life of 5000 h
heating area: 25 m2
3 power levels: 650 W, 1300 W, 2000 W
infrared waves: medium, long
heating time: 20 seconds
installation location: wall or stand
control: pull cord switch
application: indoors and outdoors
The infrared heater works by radiation, i.e. similarly to the sun. Heat is emitted in the form of infrared radiation, and air is not needed for this. It heats a given place or people immediately and directly. IMPORTANT: Due to the high power of the device, the mains circuit must be equipped with a protective conductor and a fuse of at least 16 A. When using extension cords, a high-quality extension cord with three wires that can withstand a current load of 16 A must be used. If in doubt, contact a qualified electrician.