Kampinis šlifuoklis | greičio reguliavimas | 1700W | 125 mm (YT-821024) (Kodas: YT-821024)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
ANGLE GRINDER 125MM 1700W (2850-10000 MIN-1)
YT-821024
Mark
Yato
Symbol
YT-821024
Series
GRF
Application
cutting and grinding of rolled steel, cast iron, cast steel, hard mineral and composite materials such as porcelain stoneware, concrete, clinker, etc., grinding of stainless steel
Set contents
angle grinder, additional handle, abrasive disc cover, key for mounting the abrasive disc
Turnover
2850-10500 min⁻¹
Mass
2.5kg
Tension
230-240 V a.c.
Power
1700 W
Cable length
3 m
Level of security
IPX0
Frequency
50 Hz
Electrical insulation class
II
Sound pressure
97.0 ± 3.0 dB(A)
Acoustic power
105.0 ± 3.0 dB(A)
Electronically adjustable rotation speed
Yes
Vibrations
4.5 ± 1.5 m/s²
Diameter of the abrasive disc
125mm
Bore diameter of the abrasive disc
22mm
Soft start
Yes
Spindle thread size
M14 One of the most powerful 125mm angle grinders on the market. Designed for cutting rolled steel, cast iron, cast steel, hard mineral and composite materials, for example: porcelain stoneware, concrete, clinker. Thanks to the speed regulation and low speed maintenance system, it is also suitable for grinding stainless steel. The device is equipped with a reinforced gear and a soft start system that ensures a longer engine life. The powerful motor with copper winding is covered with resin to protect against damage. The three-position auxiliary handle is screwed onto the sides or top of the gear cover. The comfortable operation of the grinder is made possible by a 3-meter-long rubber cable. The side switch is handy, durable and allows you to easily turn on the grinder even when wearing work gloves. The outer diameter of the housing is slim, which allows for a safe, secure grip and guidance of the disc along the cutting line. The quick brush replacement system allows replacement without disassembling the entire device. revolutions: 2,850-10,500 rpm
abrasive disc diameter: 125 mm
abrasive disc hole diameter: 22 mm
spindle thread size: M14
weight: 2.5kg
cable length: 3 m
YT-821024
Mark
Yato
Symbol
YT-821024
Series
GRF
Application
cutting and grinding of rolled steel, cast iron, cast steel, hard mineral and composite materials such as porcelain stoneware, concrete, clinker, etc., grinding of stainless steel
Set contents
angle grinder, additional handle, abrasive disc cover, key for mounting the abrasive disc
Turnover
2850-10500 min⁻¹
Mass
2.5kg
Tension
230-240 V a.c.
Power
1700 W
Cable length
3 m
Level of security
IPX0
Frequency
50 Hz
Electrical insulation class
II
Sound pressure
97.0 ± 3.0 dB(A)
Acoustic power
105.0 ± 3.0 dB(A)
Electronically adjustable rotation speed
Yes
Vibrations
4.5 ± 1.5 m/s²
Diameter of the abrasive disc
125mm
Bore diameter of the abrasive disc
22mm
Soft start
Yes
Spindle thread size
M14 One of the most powerful 125mm angle grinders on the market. Designed for cutting rolled steel, cast iron, cast steel, hard mineral and composite materials, for example: porcelain stoneware, concrete, clinker. Thanks to the speed regulation and low speed maintenance system, it is also suitable for grinding stainless steel. The device is equipped with a reinforced gear and a soft start system that ensures a longer engine life. The powerful motor with copper winding is covered with resin to protect against damage. The three-position auxiliary handle is screwed onto the sides or top of the gear cover. The comfortable operation of the grinder is made possible by a 3-meter-long rubber cable. The side switch is handy, durable and allows you to easily turn on the grinder even when wearing work gloves. The outer diameter of the housing is slim, which allows for a safe, secure grip and guidance of the disc along the cutting line. The quick brush replacement system allows replacement without disassembling the entire device. revolutions: 2,850-10,500 rpm
abrasive disc diameter: 125 mm
abrasive disc hole diameter: 22 mm
spindle thread size: M14
weight: 2.5kg
cable length: 3 m