Kniediklis srieginėms kniedėms profi | M3 / M4 / M5 / M6 | 200 mm (NR200A) (Kodas: NR200A)
Išparduota
Padidinti vaizdą 
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Essen tools
Kartoninėje dėžutėje
Professional tool for commercial or occasional use
Suitable for most materials that cannot be tapped or welded.
Not suitable for steel rivets (please look at the shop for our stronger riveter that will do these)
Requires access to only one side of the work piece, nut can be installed after painting or other final finishing operations to provide a robust screw anchor therefore eliminating problems of welding and material distortion.
Simple to use only one operation is required from one side.
Dual action may be used as blind fastener or screw anchor.
Strong thread at least 6 thread turns, even if used on thin materials
Sets threaded rivets into thin materials
Permanent and reliable fastening
Soft grip handles for comfort and grip when using this application.
Leaves a strong / professional looking fastener
Suitable for inaccessible locations.
Total length of the tool 200mm
1000N riveting force
Manufactured from heavy duty steel for strength and durability.
Internal fixed sleeve to replace screw easy.
Nut Sert range M3 / M4 / M5 and M6 Hand Nut Riveter Tool / Nut Sert tool Rivnut +M3 M4 M5 M6
Suitable for most materials that cannot be tapped or welded.
Not suitable for steel rivets (please look at the shop for our stronger riveter that will do these)
Requires access to only one side of the work piece, nut can be installed after painting or other final finishing operations to provide a robust screw anchor therefore eliminating problems of welding and material distortion.
Simple to use only one operation is required from one side.
Dual action may be used as blind fastener or screw anchor.
Strong thread at least 6 thread turns, even if used on thin materials
Sets threaded rivets into thin materials
Permanent and reliable fastening
Soft grip handles for comfort and grip when using this application.
Leaves a strong / professional looking fastener
Suitable for inaccessible locations.
Total length of the tool 200mm
1000N riveting force
Manufactured from heavy duty steel for strength and durability.
Internal fixed sleeve to replace screw easy.
Nut Sert range M3 / M4 / M5 and M6 Hand Nut Riveter Tool / Nut Sert tool Rivnut +M3 M4 M5 M6