Skylių žymėjimo šablonas (YT-44130) (Kodas: YT-44130)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
Product description
Template, guide for determining drilling points. The main arm is made of aluminum, has a permanent millimeter scale up to 250 mm and a movable, screw-locked parallel stop. In the upper part a movable steel strip is mounted, on which three sliding markers are used to determine the exact drilling points.
Purpose / application
The template is intended for precise marking of points where we will drill holes. At the same time, we can mark four holes at different distances from each other and, by blocking the settings, maintain the repeatability of the selection, i.e. mark the same configuration, e.g. on a different material.
The template facilitates routing on various materials, e.g. wood, metal, plastics, etc.
Usage
Adjust the distance between the markers as required and lock them with the locking screws. Then set the parallel bar to determine the distance from the edge of the workpiece. Using a marker, pencil or center punch mark the drilling places on the material.
Template, guide for determining drilling points. The main arm is made of aluminum, has a permanent millimeter scale up to 250 mm and a movable, screw-locked parallel stop. In the upper part a movable steel strip is mounted, on which three sliding markers are used to determine the exact drilling points.
Purpose / application
The template is intended for precise marking of points where we will drill holes. At the same time, we can mark four holes at different distances from each other and, by blocking the settings, maintain the repeatability of the selection, i.e. mark the same configuration, e.g. on a different material.
The template facilitates routing on various materials, e.g. wood, metal, plastics, etc.
Usage
Adjust the distance between the markers as required and lock them with the locking screws. Then set the parallel bar to determine the distance from the edge of the workpiece. Using a marker, pencil or center punch mark the drilling places on the material.