Lituoklis | 900 mm antgalis | 200-450C | 50W (YT-82700) (Kodas: YT-82700)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
Product description
YT-82700 soldering iron with temperature control by means of a knob, adapted to the very popular replaceable tips from the 900M series. A LED diode built into the housing indicates that the device is turned on. power: 50W
temperature range: 200-450 ° C
temperature accuracy: + -25 ° C
temperature stabilization
ceramic heater
cable length: 1.4 m
The YT-82700 soldering iron to the operating temperature of 350 ° C heats up in about 60 seconds. The temperature stabilization function allows to maintain the set temperature of the tip in various conditions of heat demand for the proper soldering connection. Depending on the size of the soldered element, the tip gives off more or less heat, and the device, using the built-in tip temperature sensor, reads its real value on an ongoing basis and compares it to the set one, then, depending on the needs, it increases or decreases the power consumption to maintain the set temperature. Parameters
Power [W]: 50
Warm-up time [s]: 60 s to 350 ° C
Max temperature of the tip [° C]: 450
YT-82700 soldering iron with temperature control by means of a knob, adapted to the very popular replaceable tips from the 900M series. A LED diode built into the housing indicates that the device is turned on. power: 50W
temperature range: 200-450 ° C
temperature accuracy: + -25 ° C
temperature stabilization
ceramic heater
cable length: 1.4 m
The YT-82700 soldering iron to the operating temperature of 350 ° C heats up in about 60 seconds. The temperature stabilization function allows to maintain the set temperature of the tip in various conditions of heat demand for the proper soldering connection. Depending on the size of the soldered element, the tip gives off more or less heat, and the device, using the built-in tip temperature sensor, reads its real value on an ongoing basis and compares it to the set one, then, depending on the needs, it increases or decreases the power consumption to maintain the set temperature. Parameters
Power [W]: 50
Warm-up time [s]: 60 s to 350 ° C
Max temperature of the tip [° C]: 450