Suvirinimo aparatas | inverterterinis | MMA su PFC 200A (YT-81358) (Kodas: YT-81358)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
T-81358
MMA INVERTER WELDING MACHINE WITH PFC 200A
Mark
Yato
Symbol
YT-81358
Type of welding machine
PFC, IGBT
Max. welding current
85 (MMA), 200 (TIG lift) A
Min. welding current
10 (MMA), 10 (TIG lift) A
Tension
115, 230 V a.c.
Frequency
50/60 Hz
Power factor
0.93
Dimensions
350x138x270mm
Electrode diameter
1.6~4mm
Duty cycle
15 (MMA), 25 (TIG lift) %
Power source efficiency
80%
CPU processor
Yes
VRD voltage reduction system
Yes
Arch stabilization
Yes
Hot start
Yes
Display type
LCD, segmented
Overheating protection
Yes
Short circuit protection function
Yes
Possibility of power supply from a generator
Yes
Winding insulation class
F
Electrical insulation class
AND
Level of security
IP21
Mass
6.19kg
Set contents
welding machine, grounding clamps 300 A, 3 m (16 mm2), electrode holder 200 A, 3 m (16 mm2), power cable 2.5 m, shoulder strap
Application
welding with coated electrodes (MMA method) with direct current and non-consumable electrodes (TIG lift method) with direct or pulsed current - acidic, basic and cellulose
Application continued
steel, stainless steel, cast iron, copper, aluminum and others.
Welding method
MMA, TIG lift, TIG lift with pulse
3 417 / 5 000
Vertimo rezultatai
Vertimo rezultatas
MMA 200A PFC inverter welding machine with a power factor correction module, advanced functions and the option of DC TIG LIFT welding with pulse. The PFC module reduces interference transmitted to the network and lowers passive energy consumption. As a result, we minimize the risk of welding repairs in places with sensitive electronics, and we will also use the full potential of the welder (maximum amperage) even with a 50-meter extension cord. Suitable for rutile, cellulose and alkaline electrodes. Basic information: Welding current: 10-200A
Recommended electrode diameter: 1.6-4.0mm
Electrode holder up to 200A, cable cross-section 16mm2, length 3 meters
Mass holder up to 300A, cable cross-section 16 mm2, length 3 meters
Power cord: H07RN-F 3G2.5mm2, length 2.5 meters
Efficiency: 80%
Power factor: 0.93
Adjustable shoulder strap
Dimensions: 350X138X270mm
Weight: 6.2kg
PFC module: Reduces energy consumption and limits current harmonics. The YT-81358 at a maximum setting of 200A will draw 7.1 kVA. A welder with the same welding current, without a PFC module, will consume approximately 9.9 kVA. Almost 3 kVA more at 230V supply voltage is a huge problem for both the electrical installation and power generators. In many cases, the maximum amperage of the welding machine will not be possible to achieve due to the activation of the installation's overcurrent protections, high voltage drop (especially for installations with a cable cross-section of less than 4 mm2), or throttling of the generator. Functions: DC Pulse
Real Hot Start with regulation
Real Arc Force with adjustment
Anti stick
VRD
Voltage modes for basic, cellulose and acid electrodes
Overheating protection, fan on demand
Function description: DC pulse - welding with pulsed current. The welding current alternates between base and peak levels in an orderly manner. This reduces the overall heat input to the welded material and reduces spatter. Makes it easier to weld metals with high thermal conductivity, as well as thinner metals, without burning them/burning holes. Additionally, you can achieve narrower and deeper welds on thicker metals. The YT-81358 model has an adjustable pulse frequency in the range from 1 to 100 Hz and the peak and base current power values relative to the algorithm for a given setting in the range from 10 to 50%. Hot start - when the electrode is placed on the material to be welded, the welder increases the welding current for a fraction of a second, which makes it much easier to ignite the arc. The YT-81358 model allows you to adjust the function in the range of 0-50% and its operation time from 0.0 to 2.0s. Arc force - regulates the dynamics of the arc depending on the distance of the electrode from the welded element. The YT-81358 model has adjustable parameters of this function in the range of -15 to +15%. Anti stick - cuts off the welding current when the electrode is short-circuited, which allows the electrode to be separated from the welded material. VRD - the function reduces the no-load voltage from approximately 60V to a level that is safe for humans. The YT-81358 model has the ability to turn the VRD function on and off. Electrode modes - automatic regulation of output voltage for different types of electrodes. The YT-81358 model has dedicated settings for basic (E7018), cellulose (E6010) and rutile (E6013) electrodes. Overheating protection (fan on demand) - the microprocessor in the YT-81358 checks the temperature of critical components in real time. Depending on the temperature, it turns on and controls the fan speed.
MMA INVERTER WELDING MACHINE WITH PFC 200A
Mark
Yato
Symbol
YT-81358
Type of welding machine
PFC, IGBT
Max. welding current
85 (MMA), 200 (TIG lift) A
Min. welding current
10 (MMA), 10 (TIG lift) A
Tension
115, 230 V a.c.
Frequency
50/60 Hz
Power factor
0.93
Dimensions
350x138x270mm
Electrode diameter
1.6~4mm
Duty cycle
15 (MMA), 25 (TIG lift) %
Power source efficiency
80%
CPU processor
Yes
VRD voltage reduction system
Yes
Arch stabilization
Yes
Hot start
Yes
Display type
LCD, segmented
Overheating protection
Yes
Short circuit protection function
Yes
Possibility of power supply from a generator
Yes
Winding insulation class
F
Electrical insulation class
AND
Level of security
IP21
Mass
6.19kg
Set contents
welding machine, grounding clamps 300 A, 3 m (16 mm2), electrode holder 200 A, 3 m (16 mm2), power cable 2.5 m, shoulder strap
Application
welding with coated electrodes (MMA method) with direct current and non-consumable electrodes (TIG lift method) with direct or pulsed current - acidic, basic and cellulose
Application continued
steel, stainless steel, cast iron, copper, aluminum and others.
Welding method
MMA, TIG lift, TIG lift with pulse
3 417 / 5 000
Vertimo rezultatai
Vertimo rezultatas
MMA 200A PFC inverter welding machine with a power factor correction module, advanced functions and the option of DC TIG LIFT welding with pulse. The PFC module reduces interference transmitted to the network and lowers passive energy consumption. As a result, we minimize the risk of welding repairs in places with sensitive electronics, and we will also use the full potential of the welder (maximum amperage) even with a 50-meter extension cord. Suitable for rutile, cellulose and alkaline electrodes. Basic information: Welding current: 10-200A
Recommended electrode diameter: 1.6-4.0mm
Electrode holder up to 200A, cable cross-section 16mm2, length 3 meters
Mass holder up to 300A, cable cross-section 16 mm2, length 3 meters
Power cord: H07RN-F 3G2.5mm2, length 2.5 meters
Efficiency: 80%
Power factor: 0.93
Adjustable shoulder strap
Dimensions: 350X138X270mm
Weight: 6.2kg
PFC module: Reduces energy consumption and limits current harmonics. The YT-81358 at a maximum setting of 200A will draw 7.1 kVA. A welder with the same welding current, without a PFC module, will consume approximately 9.9 kVA. Almost 3 kVA more at 230V supply voltage is a huge problem for both the electrical installation and power generators. In many cases, the maximum amperage of the welding machine will not be possible to achieve due to the activation of the installation's overcurrent protections, high voltage drop (especially for installations with a cable cross-section of less than 4 mm2), or throttling of the generator. Functions: DC Pulse
Real Hot Start with regulation
Real Arc Force with adjustment
Anti stick
VRD
Voltage modes for basic, cellulose and acid electrodes
Overheating protection, fan on demand
Function description: DC pulse - welding with pulsed current. The welding current alternates between base and peak levels in an orderly manner. This reduces the overall heat input to the welded material and reduces spatter. Makes it easier to weld metals with high thermal conductivity, as well as thinner metals, without burning them/burning holes. Additionally, you can achieve narrower and deeper welds on thicker metals. The YT-81358 model has an adjustable pulse frequency in the range from 1 to 100 Hz and the peak and base current power values relative to the algorithm for a given setting in the range from 10 to 50%. Hot start - when the electrode is placed on the material to be welded, the welder increases the welding current for a fraction of a second, which makes it much easier to ignite the arc. The YT-81358 model allows you to adjust the function in the range of 0-50% and its operation time from 0.0 to 2.0s. Arc force - regulates the dynamics of the arc depending on the distance of the electrode from the welded element. The YT-81358 model has adjustable parameters of this function in the range of -15 to +15%. Anti stick - cuts off the welding current when the electrode is short-circuited, which allows the electrode to be separated from the welded material. VRD - the function reduces the no-load voltage from approximately 60V to a level that is safe for humans. The YT-81358 model has the ability to turn the VRD function on and off. Electrode modes - automatic regulation of output voltage for different types of electrodes. The YT-81358 model has dedicated settings for basic (E7018), cellulose (E6010) and rutile (E6013) electrodes. Overheating protection (fan on demand) - the microprocessor in the YT-81358 checks the temperature of critical components in real time. Depending on the temperature, it turns on and controls the fan speed.