Pjūklas medžiui | teflonas | 500 mm (28387) (Kodas: 28387)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Mark
Vorel
Symbol
28387
Series
GRD
Application
wood, wood-based materials
Surface finish
PTFE coated
Length
500mm
Handle material
TPR, ABS
Thickness
0.9mm
Blade material
steel 65Mn
Hardness
46-48 HRC
rz
1.6mm
Teeth per inch
7 TPI
The hardness of the working part
50-54 HRC
Number of cutting edges
3
No jamming
Yes Classic, manual saw for cutting wood, the so-called payment. Saw length 500mm. The blade is made of manganese steel with the symbol 65 Mn, permanently covered with a layer of PTFE /teflon/ that reduces friction and accelerates cutting. The tooth sharpened in three planes guarantees aggressive cutting in both directions. Ergonomic handle made of ABS and TPR. Hardness of the working part 50 - 54 HRC. Pitch 7 tpi.
Vorel
Symbol
28387
Series
GRD
Application
wood, wood-based materials
Surface finish
PTFE coated
Length
500mm
Handle material
TPR, ABS
Thickness
0.9mm
Blade material
steel 65Mn
Hardness
46-48 HRC
rz
1.6mm
Teeth per inch
7 TPI
The hardness of the working part
50-54 HRC
Number of cutting edges
3
No jamming
Yes Classic, manual saw for cutting wood, the so-called payment. Saw length 500mm. The blade is made of manganese steel with the symbol 65 Mn, permanently covered with a layer of PTFE /teflon/ that reduces friction and accelerates cutting. The tooth sharpened in three planes guarantees aggressive cutting in both directions. Ergonomic handle made of ABS and TPR. Hardness of the working part 50 - 54 HRC. Pitch 7 tpi.