Pjūklas stumdomam siaurapjūkliui | HCS 230 mm 12T (YT-33970) (Kodas: YT-33970)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
HCS SAW BLADE 230MM 12T FOR STRAIGHT RECIRCULAR SAW CUTTING
Mark
Yato
Symbol
YT-33970
Series
GRD
Material
HCS
Application
wet wood and branches (Ø5-175 mm)|for straight cuts
For
YT-82281|YT-82814|YT-82815|YT-82904
Length
230mm
Thickness
1.0 mm
Tool holder type
standard
Teeth per inch
12TPI A reciprocating saw blade that cuts wood and chipboard lengthwise straight and accurately, without the vibrations associated with traditional narrow blades. The total length of 230 mm makes it possible to cut scantlings, round logs or wall battens and rafters up to 200 mm thick at right angles. It is perfect for works related to the construction of carports, houses in the garden, roofs or shuttering works. The strength and precision of the combination of this blade with the power of a reciprocating saw makes it easier, safer and cheaper to cut all elements of wood and boards than using, for example, a chainsaw, where the chain quickly needs to be sharpened again after contact with the ground or sand. The saw blade has a standard tool holder for all saber saws, which holds the tool stably and allows for installation in two positions: teeth down or teeth up (which makes it easier to cut e.g. soffit from the bottom).
Mark
Yato
Symbol
YT-33970
Series
GRD
Material
HCS
Application
wet wood and branches (Ø5-175 mm)|for straight cuts
For
YT-82281|YT-82814|YT-82815|YT-82904
Length
230mm
Thickness
1.0 mm
Tool holder type
standard
Teeth per inch
12TPI A reciprocating saw blade that cuts wood and chipboard lengthwise straight and accurately, without the vibrations associated with traditional narrow blades. The total length of 230 mm makes it possible to cut scantlings, round logs or wall battens and rafters up to 200 mm thick at right angles. It is perfect for works related to the construction of carports, houses in the garden, roofs or shuttering works. The strength and precision of the combination of this blade with the power of a reciprocating saw makes it easier, safer and cheaper to cut all elements of wood and boards than using, for example, a chainsaw, where the chain quickly needs to be sharpened again after contact with the ground or sand. The saw blade has a standard tool holder for all saber saws, which holds the tool stably and allows for installation in two positions: teeth down or teeth up (which makes it easier to cut e.g. soffit from the bottom).