Pjūklas stumdomam siaurapjūkliui | HCS 230 mm 6T (YT-33971) (Kodas: YT-33971)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
HCS SAW BLADE 230MM 6T FOR STRAIGHT RECIRCULAR SAW CUTTING
Mark
Yato
Symbol
YT-33971
Series
GRD
Material
HCS
Application
wet wood and branches (Ø5-70 mm)|for straight cuts
For
YT-82281|YT-82814|YT-82815|YT-82904
Length
230mm
Thickness
1.2mm
Tool holder type
standard
Teeth per inch
6 TPI Reciprocating saw blade that cuts wood and chipboard longitudinally at maximum speed (6TPI), without the vibrations associated with traditional narrow blades. The total length of 230 mm makes it possible to cut elements such as scantlings, round logs or wall plates and rafters up to 200 mm thick evenly at right angles. It is perfect for works related to the construction of carports, houses in the garden, roofs or shuttering works. The strength and precision of combining this blade with the power of a reciprocating saw makes it easier, safer and cheaper to cut any elements made of wood and boards than using, for example, a chainsaw, where the chain quickly needs to be sharpened again after contact with the ground or sand. The saw blade has a standard tool holder for all saber saws, which holds the tool stably and allows for installation in two positions: teeth down or teeth up (facilitates cutting e.g. roof soffit from below).
Mark
Yato
Symbol
YT-33971
Series
GRD
Material
HCS
Application
wet wood and branches (Ø5-70 mm)|for straight cuts
For
YT-82281|YT-82814|YT-82815|YT-82904
Length
230mm
Thickness
1.2mm
Tool holder type
standard
Teeth per inch
6 TPI Reciprocating saw blade that cuts wood and chipboard longitudinally at maximum speed (6TPI), without the vibrations associated with traditional narrow blades. The total length of 230 mm makes it possible to cut elements such as scantlings, round logs or wall plates and rafters up to 200 mm thick evenly at right angles. It is perfect for works related to the construction of carports, houses in the garden, roofs or shuttering works. The strength and precision of combining this blade with the power of a reciprocating saw makes it easier, safer and cheaper to cut any elements made of wood and boards than using, for example, a chainsaw, where the chain quickly needs to be sharpened again after contact with the ground or sand. The saw blade has a standard tool holder for all saber saws, which holds the tool stably and allows for installation in two positions: teeth down or teeth up (facilitates cutting e.g. roof soffit from below).