Apsauginis amortizatorius su dviem diržais ir karabinų komplektu (YT-74225) (Kodas: YT-74225)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
SAFETY SHOCK ABSORBER WITH DOUBLE STRAP AND SET OF STEEL SNAP LATCHES
Product description
The YT-74225 shock absorber with two straps and a set of carabiners is an element of the fall arrest system connecting the safety harness with the anchor point. The shock absorber with a double strap is dedicated to work in places with a narrow field of maneuver and the need to frequently change the anchoring point, e.g. when working on scaffolding, trusses or booms. The use of hook fasteners with a large clearance allows you to quickly switch alternately while moving, thus maintaining the continuity of the belaying. The shock absorber is made of a properly sewn polyester tape. When arresting a fall, specially designed seams tear gradually, slowing down the speed of the fall length: 1.8 m
tape width: 45 mm
one self-closing carabiner with automatic locking, maximum opening: 17 mm
two hook carabiners with automatic locking, maximum opening 55 mm
permanently connected to the tape
The YT-74225 shock absorber with a strap and two carabiners has been tested in an EU-accredited laboratory and meets the requirements of EN 355: 2002. SECURITY AND LEGAL ASPECTS Work at height is work performed at a level greater than 1 meter above the ground / floor, the surface of which is not surrounded on all sides by solid walls or a protective structure up to a height of 1.5 meters. If, in such conditions, it is not possible to apply collective protection measures, the employer, when commissioning work, should, inter alia, provide personal protective equipment. Each piece of fall protection equipment should meet certain safety standards, which the manufacturer only confirms through an EU-accredited testing laboratory. Confirmation of compliance with the standards primarily guarantees the user's safety, but also protects both the employee and the employer against financial consequences resulting from penalties imposed by the labor inspection institution. All elements of the YATO fall protection equipment have up-to-date tests confirming compliance with safety standards, and their use in accordance with the instructions guarantees 5 years of reliable operation. THE TERM OF VALIDITY The service life of the safety shock absorber is five years, counted from the first use. Parameters
Material: polyester
Product description
The YT-74225 shock absorber with two straps and a set of carabiners is an element of the fall arrest system connecting the safety harness with the anchor point. The shock absorber with a double strap is dedicated to work in places with a narrow field of maneuver and the need to frequently change the anchoring point, e.g. when working on scaffolding, trusses or booms. The use of hook fasteners with a large clearance allows you to quickly switch alternately while moving, thus maintaining the continuity of the belaying. The shock absorber is made of a properly sewn polyester tape. When arresting a fall, specially designed seams tear gradually, slowing down the speed of the fall length: 1.8 m
tape width: 45 mm
one self-closing carabiner with automatic locking, maximum opening: 17 mm
two hook carabiners with automatic locking, maximum opening 55 mm
permanently connected to the tape
The YT-74225 shock absorber with a strap and two carabiners has been tested in an EU-accredited laboratory and meets the requirements of EN 355: 2002. SECURITY AND LEGAL ASPECTS Work at height is work performed at a level greater than 1 meter above the ground / floor, the surface of which is not surrounded on all sides by solid walls or a protective structure up to a height of 1.5 meters. If, in such conditions, it is not possible to apply collective protection measures, the employer, when commissioning work, should, inter alia, provide personal protective equipment. Each piece of fall protection equipment should meet certain safety standards, which the manufacturer only confirms through an EU-accredited testing laboratory. Confirmation of compliance with the standards primarily guarantees the user's safety, but also protects both the employee and the employer against financial consequences resulting from penalties imposed by the labor inspection institution. All elements of the YATO fall protection equipment have up-to-date tests confirming compliance with safety standards, and their use in accordance with the instructions guarantees 5 years of reliable operation. THE TERM OF VALIDITY The service life of the safety shock absorber is five years, counted from the first use. Parameters
Material: polyester