Šlifavimo mašinėlė | plienui ir medienai šlifuoti | 1300W (YT-81953) (Kodas: YT-81953)
Išparduota
Padidinti vaizdą 
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
SATINER 1300W FOR GRINDING STEEL AND WOOD
Mark
Yato
Symbol
YT-81953
Series
GRF
Application
for the treatment of wooden or metal surfaces|for removing paint coatings|for smoothing the surface
Kit contents
satin machine|additional handle|metal brush|nylon brush
Turnover
900-3700 min⁻¹
Mass
5 kg
Tension
230Vac
Power
1300W
Cable length
3 m
Level of security
IP20
Frequency
50 Hz
Electrical insulation class
II
sound pressure
88.0 ± 3.0dB(A)
Acoustic power
99.0 ± 3.0dB(A)
Electronically adjustable speed
Yes
Vibrations
8.85 ± 1.5 m/s²
Dust extraction system
Yes
Brush diameter
120mm
Brush width
100mm
Brush mounting diameter
19mm
The device is designed for grinding metal and wood. Removes paint coatings (lacquers, paints, stain) or rust without fear of damaging the surface of the material. Work progresses faster than with an angle grinder or wire brush. The central position of the roller in the axis of the machine causes symmetrical pressure and even removal of coatings. The motor and gearbox are resistant to the loads caused by pressing the roller against the workpiece. The satin machine will be perfect for renovating terraces and aging wood. Recommended for cleaning: terrace boards
floorboards
surface of boat hulls with rust
bitumen before welding car chassis structures
Mark
Yato
Symbol
YT-81953
Series
GRF
Application
for the treatment of wooden or metal surfaces|for removing paint coatings|for smoothing the surface
Kit contents
satin machine|additional handle|metal brush|nylon brush
Turnover
900-3700 min⁻¹
Mass
5 kg
Tension
230Vac
Power
1300W
Cable length
3 m
Level of security
IP20
Frequency
50 Hz
Electrical insulation class
II
sound pressure
88.0 ± 3.0dB(A)
Acoustic power
99.0 ± 3.0dB(A)
Electronically adjustable speed
Yes
Vibrations
8.85 ± 1.5 m/s²
Dust extraction system
Yes
Brush diameter
120mm
Brush width
100mm
Brush mounting diameter
19mm
The device is designed for grinding metal and wood. Removes paint coatings (lacquers, paints, stain) or rust without fear of damaging the surface of the material. Work progresses faster than with an angle grinder or wire brush. The central position of the roller in the axis of the machine causes symmetrical pressure and even removal of coatings. The motor and gearbox are resistant to the loads caused by pressing the roller against the workpiece. The satin machine will be perfect for renovating terraces and aging wood. Recommended for cleaning: terrace boards
floorboards
surface of boat hulls with rust
bitumen before welding car chassis structures