Prisisiurbiantis kėliklis | ypač stiprus | 58 kg / Ø 204 mm (YT-37220) (Kodas: YT-37220)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
Product description
Windshield holder with a vacuum pump. Body made of ABS plastic. It has a flat rubber suction cup with a diameter of 204 mm / 8 ”/. Capacity 58 kg / 128 lbs /. The grip should be used on clean, smooth and non-porous surfaces, at a temperature of -18 ° to 49 °. It is designed to carry glass, laminated boards, sheets, etc. The product can lift 125% of the rated load for over 10 minutes. Purpose / application
A handle for comfortable and safe carrying of flat, non-porous elements such as glass, ceramic plates, laminated tops, sheets, etc.
Usage method
Press the flat side of the handle / the rubber suction cup / against the material, then carefully press the pump button several times protruding from the handle.
The negative pressure it creates causes the grip to stick firmly to the material. Release the handle by pressing the button on the handle.
Windshield holder with a vacuum pump. Body made of ABS plastic. It has a flat rubber suction cup with a diameter of 204 mm / 8 ”/. Capacity 58 kg / 128 lbs /. The grip should be used on clean, smooth and non-porous surfaces, at a temperature of -18 ° to 49 °. It is designed to carry glass, laminated boards, sheets, etc. The product can lift 125% of the rated load for over 10 minutes. Purpose / application
A handle for comfortable and safe carrying of flat, non-porous elements such as glass, ceramic plates, laminated tops, sheets, etc.
Usage method
Press the flat side of the handle / the rubber suction cup / against the material, then carefully press the pump button several times protruding from the handle.
The negative pressure it creates causes the grip to stick firmly to the material. Release the handle by pressing the button on the handle.