Testeris baterijoms | 1,5 V ir 9 V | visų rūšių baterijoms (81700) (Kodas: 81700)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Sthor
BATTERY TESTER 1.5V AND 9V ALL KINDS
Mark
Sthor
Symbol
81700
Series
GRD
Dimensions
100x60mm
Material
ABS
Application
for checking all types of 1.5V and 9V batteries
Power
1.5V, 9V
Battery type
1.5V: AA, AAA, R03, SH16, MN2400, HP7, MN1500, UM3, C, HP11, MN1400, SO11, LR14, UM2 D, HP2, MN1399, SP2, R20, UM1; 9V: PP3, MN1604, 6F22, 006P
Mass
46g
Display type
analog Tester for all types of batteries with a nominal voltage of 1.5V and 9V. It allows you to check in a very simple way whether the battery is usable. The tester does not require power. The measurement is made by touching the battery poles with the metal ends of the tester. The measurement takes place under load, which makes it more reliable than measuring with a traditional multimeter. Thanks to its small size, it will fit in any cabinet or toolbox. a green field with the word GOOD - the battery is usable
yellow field with the inscription LOW - the battery will run out soon
red field with the words REPLACE, RECHARGE - battery at the end of its life, to be replaced with a new one
Mark
Sthor
Symbol
81700
Series
GRD
Dimensions
100x60mm
Material
ABS
Application
for checking all types of 1.5V and 9V batteries
Power
1.5V, 9V
Battery type
1.5V: AA, AAA, R03, SH16, MN2400, HP7, MN1500, UM3, C, HP11, MN1400, SO11, LR14, UM2 D, HP2, MN1399, SP2, R20, UM1; 9V: PP3, MN1604, 6F22, 006P
Mass
46g
Display type
analog Tester for all types of batteries with a nominal voltage of 1.5V and 9V. It allows you to check in a very simple way whether the battery is usable. The tester does not require power. The measurement is made by touching the battery poles with the metal ends of the tester. The measurement takes place under load, which makes it more reliable than measuring with a traditional multimeter. Thanks to its small size, it will fit in any cabinet or toolbox. a green field with the word GOOD - the battery is usable
yellow field with the inscription LOW - the battery will run out soon
red field with the words REPLACE, RECHARGE - battery at the end of its life, to be replaced with a new one