Pripūtimo žarna su antgaliais | 6x10 mm | 18 m (YT-24282) (Kodas: YT-24282)
Prekių nuotraukos skirtos tik iliustraciniams tikslams, originalių produktų spalvos, užrašai, parametrai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Kilus klausimams, visada laukiame Jūsų skambučio telefonu +370 650 61061 arba el. paštu info@drdtools.lt.
Gamintojas: Yato
18M PNEUMATIC HOSE FOR INFLATING WHEELS
YT-24282
Mark
Yato
Symbol
YT-24282
Series
GRE
Material
PVC, polyester
Application
for pumping in buses, trucks, semi-trailers, agricultural tractors, etc.
Operating temperature range
-20 ~ +60 ˚C
Length
18 m
Thread size
M16x1.5mm
Mass
1 kg
Outer diameter
10mm
Bursting pressure
3.5 MPa
Inner diameter
6mm
Working pressure
1 MPa Professional, flexible compressed air hose. Adapted to vehicles with an air compressor. Used for inflating buses, trucks, semi-trailers, agricultural tractors, etc. It allows inflating all wheels even in a very long vehicle. The cable is terminated with connectors on both sides. On one side, it ends with a butterfly tip with an M16x1.5 mm internal thread adapted to car compressors. On the other hand, there is a connection terminal adapted to a standard car valve. The hose is made of three layers. The inner part is made of soft PVC and a dense, textile reinforcing polyester braid. Outer layer made of weather-resistant PVC. outer diameter: 10 mm
inner diameter: 6 mm
working pressure: 1.0 MPa (10 atm) at an ambient temperature of 23 °C
burst pressure: 3.5 MPA (35 atm) at an ambient temperature of 23 °C
safe operating temperature range: -20 °C to 60 °C
weight: 0.5 kg
YT-24282
Mark
Yato
Symbol
YT-24282
Series
GRE
Material
PVC, polyester
Application
for pumping in buses, trucks, semi-trailers, agricultural tractors, etc.
Operating temperature range
-20 ~ +60 ˚C
Length
18 m
Thread size
M16x1.5mm
Mass
1 kg
Outer diameter
10mm
Bursting pressure
3.5 MPa
Inner diameter
6mm
Working pressure
1 MPa Professional, flexible compressed air hose. Adapted to vehicles with an air compressor. Used for inflating buses, trucks, semi-trailers, agricultural tractors, etc. It allows inflating all wheels even in a very long vehicle. The cable is terminated with connectors on both sides. On one side, it ends with a butterfly tip with an M16x1.5 mm internal thread adapted to car compressors. On the other hand, there is a connection terminal adapted to a standard car valve. The hose is made of three layers. The inner part is made of soft PVC and a dense, textile reinforcing polyester braid. Outer layer made of weather-resistant PVC. outer diameter: 10 mm
inner diameter: 6 mm
working pressure: 1.0 MPa (10 atm) at an ambient temperature of 23 °C
burst pressure: 3.5 MPA (35 atm) at an ambient temperature of 23 °C
safe operating temperature range: -20 °C to 60 °C
weight: 0.5 kg